outgoing/complete

All your questions about AniDB belong in here.
No download support!

Moderator: AniDB

Locked
nfalco

outgoing/complete

Post by nfalco »

hi only few questions
  • when i insert all episodes (for example Please save my earth) with a group associed remain 6/6 outgoing... how i can set outgoing -> complete? Does not make by self?
  • adding a file without group associated and after that edit group counter on main page of that group does not increment. I must delete and add again :(
  • i can find howto set a escaflown movie for 3 part file
wahaha
AniDB Staff
Posts: 1497
Joined: Sun Nov 17, 2002 3:33 pm

Re: outgoing/complete

Post by wahaha »

nfalco wrote:when i insert all episodes (for example Please save my earth) with a group associed remain 6/6 outgoing... how i can set outgoing -> complete? Does not make by self?
Exactly
nfalco wrote:adding a file without group associated and after that edit group counter on main page of that group does not increment.
The group-infos will be correctly updated within 24 hours - no need to delete the file-entry.
nfalco wrote:i can['t] find howto set a escaflown movie for 3 part file
Here: HOWTO - add a movie to anidb [TEMPORARY]
Guest

Re: outgoing/complete

Post by Guest »

nfalco wrote:i can['t] find howto set a escaflown movie for 3 part file
Here: HOWTO - add a movie to anidb [TEMPORARY][/quote]

ok but procudere are only for people that create new anime into db or can be chagend??

esca movie are not movie for 3 cd entry. How i can add 3 cd part?
PS i'm not creator of esca movie entry
wahaha
AniDB Staff
Posts: 1497
Joined: Sun Nov 17, 2002 3:33 pm

Re: outgoing/complete

Post by wahaha »

Anonymous wrote:ok but procudere are only for people that create new anime into db or can be chagend??
Everyone can add new episodes - or request to change existing episodes (same for basically everything on anidb).
Anonymous wrote:How i can add 3 cd part?
(After being logged in and opening the page for the movie,) select "add part" from the bottom, enter the ep-number (4) and title ("Part 1 of 3") and click "add/edit". On the next page choose "add another ep" and repeat the above for "Part 2 of 3" and "Part 3 of 3".

After that, you can normally add the file-infos.
fahrenheit
AniDB Staff
Posts: 438
Joined: Thu Apr 08, 2004 1:43 am
Location: Portugal

Post by fahrenheit »

Well,

currently anidb doesn't handle movies which are split into more than one file very well. So please use this workaround:

Setup a movie with the following episodes:
- ep1: movie part 1 of 1
- ep2: movie part 1 of 2
- ep3: movie part 2 of 2
(if there are 3 or more part versions around also add)
- ep4: movie part 1 of 3
- ep5: movie part 2 of 3
- ep6: movie part 3 of 3

please NEVER add two parts of a movie to the same episode, this screws things up badly!
Should you have done that in the past please review your entries and edit them if needed.

BYe!
EXP
In your case, you would go to the escaflowne movie page then you:

1) would click on Add Part.

In the "Add Part for Vision of Escaflowne - A Girl in Gaea" page you would then put in part number "4" and "Part 1 of 3" as for title name english, introduce the play length of the file in the respective field and press "Add/Edit".

2) then back on the Escaflowne movie page you would press the Image icon in the action colum of the part you added (PA 4 - Part 1 of 3).

3) then on the "Add File for Vision of Escaflowne - A Girl in Gaea" for the part number you added you would add the "ed2k link" and all other information you have about each part, at the end press "ADD/EDIT" to confirm.

After these 3 steps you would repeat them again for the 2 remaing parts.

Hope that this helped.

PS: If you mess up somewhere you can allways re-edit or remove your files/parts, or ask some mod in the "DB Change Requests" to do it.
wahaha
AniDB Staff
Posts: 1497
Joined: Sun Nov 17, 2002 3:33 pm

Post by wahaha »

fahrenheit wrote:[...]introduce the play length of the file in the respective field
In an internal discussion, we concluded that the runlength of "Part X of Y" episodes should either be 0 or "total length / Y", because there's no real fixed correct value as soon as the ep has more than one file.
Der Idiot
AniDB Staff
Posts: 1227
Joined: Fri Mar 21, 2003 10:19 am

Post by Der Idiot »

wahaha wrote:
fahrenheit wrote:[...]introduce the play length of the file in the respective field
In an internal discussion, we concluded that the runlength of "Part X of Y" episodes should either be 0 or "total length / Y", because there's no real fixed correct value as soon as the ep has more than one file.
wee so apparently some people listen to what I say ^_^
wahaha
AniDB Staff
Posts: 1497
Joined: Sun Nov 17, 2002 3:33 pm

Post by wahaha »

Der Idiot wrote:wee so apparently some people listen to what I say ^_^
Yeah well... but we normally try to keep it secret ^^;
fahrenheit
AniDB Staff
Posts: 438
Joined: Thu Apr 08, 2004 1:43 am
Location: Portugal

Post by fahrenheit »

got it
Guest

Post by Guest »

ok thk
Locked